Modern entrance metal doors are reliable bastions protecting the property of citizens. Door structures are equipped with reliable locking systems, which sooner or later fail. What to do if the lock in a metal door breaks?
The best solution in this situation is to call the master of our company, who will repair the castle. If the mechanism cannot be repaired, then our master will be able to install a new locking device in place of the old one. Our experts always have with them more than 200 types of new castles and larvae of different sizes and costs.
Why should you contact us?
- Masters will come to you at any time of the day,
- Urgent departure
15 minutes,
When repairing two or more locking mechanisms - the cost of work is from 450 rubles.
+7 (499) 404-14-69
To repair the lock in the metal door, the master does not have to disassemble the door leaf. This significantly saves time, which cannot be said for iron, in which the locks are located under the upholstery and decorative overlays.
Repair a metal door and fix locks in Balashikha in one call to the house
Loops come off and the front doors sag? Failure fittings or broken handles? In such situations, there is nothing left but to turn to the master. Trying to repair iron doors, changing locks with your own hands is far from the best idea. After all, these are some of the most complex, labor-intensive works, therefore a person without practical skills will definitely not be able to cope with them.
The most common causes for repairing a metal door are as follows:
- sheet corrosion
- mechanical damage,
- locks are cracked by intruders,
- skewed and sagging doors,
- malfunction of hinges, door handles, locks,
- warp box
- damage to the upholstery by pets, third parties.
If the locks are broken, the front door is skewed, damaged after opening and lost its presentable appearance, forget about dismantling it and buying a new canvas. The practice of our masters shows that it is possible to restore and restore its integrity relatively inexpensively and at the same time quickly. The main thing is to choose professionals who will cope with these tasks mobilely.
Repair services for entrance iron doors in Balashikha: call the master in place of the installed structure
We are proud that trained and valuable specialists work in the company's staff. You can call one of them, and find out prices for services, answers to important questions on the spot. Each employee is a perfectionist with a responsible attitude to the business, who knows well the strengths and weaknesses of repairing door locks on an iron structure.
Turning to us, you can order both one and a range of services, including:
- Upholstery restoration on a metal door.
- Local restoration of the entrance canvas.
- Plumbing, welding.
- Repair and replacement of accessories.
- Elimination of distortions.
- Replacing door handles and locks.
- Door repair after hacking.
- Installation of armor plates.
- Replacement loops, overcooking.
- Straightening.
Specialized related services are provided by the specialists of the service service “Zamki-SAO” in Balashikha. Our employees are equipped with all the necessary tools, lock and hardware products, so they have no problem restoring the metal sheet quickly and at a bargain price.
Order the departure of the master to repair the entrance metal door at home
It is not so simple to repair the front door and restore a presentable and aesthetic appearance, if it was cracked, seriously damaged by intruders. However, our masters can do it. We produce welding and metalwork inexpensively. In any case, our services will cost you less than installing a new front door in Balashikha.
We are trusted with repair work, as we work:
- Fast. Departure of the master to the client in an hour or at a convenient time is not a dream. The specialist has tools, accessories and everything that may be required in the course of work.
- Inexpensive. We do not use large-scale expensive advertising, and focus on expanding our customer base. Therefore, our prices are approximately 10% lower than that of competitors.
- With a guarantee. We provide guarantees for each service. We take our obligations seriously. However, the share of warranty claims does not exceed 0.03% of the total number of applications, which indicates the professional performance of repair services by craftsmen.
- Qualitatively. Every day, our customers are convinced of the quality of work. Before putting the door into operation, we double-check its performance. Only after the customer is convinced of its functionality, he pays for the services.
Do you want to order the departure of a master to repair the entrance metal door in Balashikha? Tired of looking for a specialist through ads? We suggest that you eliminate the risks and entrust the iron sheet to those who accurately restore it at home inexpensively and as quickly as possible.
Door repair after opening
When restoring iron door blocks, welding is often required. Often we deal with cracked or falling off loops. After breaking the doors, you have to resort to welding, put patches, etc. Unprofessional lock opening services violate the integrity of the door leaf.
If you are impressed by strength, but want to improve technical specifications or aesthetics, contact us. Decorative finishes, heat and sound insulation will be cheaper than acquiring a new model with the same characteristics.
A modern lock will enhance reliability and protection. We guarantee an individual approach. We will send a specialist who thoroughly understands the problem of restoring the aesthetics of metal, knows the necessary techniques. To place or adjust your order, call us or write to e-mail. mail.
On the picture: door repair after vandal opening:
web straightening, installation of the Austrian mechanism,
pens, larvae and padding replacement.
| In the photo: the cuts are welded with a grinder and the installation of the Mettam castle is completed. To restore and tidy up the appearance of the canvas, a door trim is required. |
 |
Repair and restoration of an old door
A solid, but old door structure loses aesthetics after many years. In such a situation, you can drag the canvas with vinyl leather or put an MDF overlay. If the problem is with the lock, then you can change it to a similar one, or choose a more reliable option.
| On the picture: door upholstery after intentional damage - set on fire. The main thing is that no one was hurt in this story! Replaced spoiled upholstery. Hope that this situation will not happen again. | |
 |  |
On the picture: door insulation from the inside
trim replacement: instead of faux leather
installed MDF panel in color to the extras
locks installed: upper level
and lower cylinder.
Professional repair of metal door locks
Repair of door locks in most cases allows you to fully restore the mechanism, to extend its life by several years. With our help, you can save on the purchase of an expensive branded product, ensure the safety of residential or commercial premises.
We work 24/7 - we are ready to solve your login problem after 20-30 minutes after contacting our service. Be sure to call if:
- faced with the problem of opening and closing the door,
- "Through time" manages to turn the key in the well without effort,
- noticed that the lock or its core “walks” in the door,
- there were difficulties with slamming the door on the tongue,
- it’s difficult for you to insert the key into the well or, conversely, pull it out,
- the key is rotated one revolution out of two,
- at some points, the key simply scrolls and not only.
We will help to repair the iron door lock in Balashikha quickly and inexpensively, we will take accessories with you for your mechanism, if necessary.
Metal door repair services
Modern entrance doors are able to provide high-quality protection, heat and noise insulation. But only if they are working. SPAS-LOCKS service experts know how to repair a door to an apartment or any other room: restore functionality to them, restore the appearance of the structure, and guarantee serviceability.
We provide services:
- replacement or repair of metal door locks,
- restoration or repair of the door leaf itself or its internal filling,
- repairs of pens, eyes, loops,
- installation of additional burglary protection (plates, armored pads, panels),
- mounting and adjusting loops,
- restore the box into which the door is mounted,
- repair of the structure after an attempted hacking or opening by emergency services.
Why it is better to order entrance door repairs in SPAS-LOCKS
For many years we have specialized in providing a full range of emergency opening, maintenance, repair or replacement services for locks and door structures. Familiar with all the well-known brands of doors, their features. We know how to quickly and cost-effectively make the front door functional.
Features
There are three main features that must be considered when repairing the front door in an apartment or street in the house, based on which to select materials for restoration:
- the door must withstand physical impact. To withstand not only the blows of heavy objects, but also resist the attempt to open its upholstery in order to get to the mortise lock. The presence of rust stains even at the bottom of the canvas is a good reason to reconstruct it,
- perform decorative functions, creating comfort and without spoiling the general view of the entrance,
- heat preservation in the apartment, lack of drafts. The main percentage (about 80%) of heat loss in the room is due to improperly insulated doors.
When restoration of entrance doors is carried out, it is advisable to restore not only the door leaf, but also check the locks, fittings (hinges, handles, closers, locks, etc.), platbands, and gaskets.
If you want to strengthen the door with a metal sheet and then paint it or finish it with veneer, then consider increasing the weight of the door leaf. Ignorance of this feature of the reconstruction often becomes the reason that the door warps for a month after repair, the hinges are deformed and sag, the canvas stops closing.
The solution to the problem is to buy and hang new loops with reinforced shaft It is better not to use external patch loops. With a strong increase in the mass of the web, it is better to strengthen the box with spacers. If the door did not close well before restoration, but no signs of deformation of the hinges and the box are observed, then the seal must be replaced.
Materials
Due to the wide range of materials on the construction market, at first glance at the door it is impossible to determine what it is made of. Under a thin and graceful tree, a sheet of steel 0.5 mm thick may be hidden, or an old wooden door may be found under an impressive metal frame. The main materials that are most often used are laminate, MDF panels, self-adhesive film and veneer strips.
Laminate not only changes the appearance of the iron or wooden structure, but also significantly improves its sound insulation and insulates. If under it to put a heater, as well as on the floor, then from the inside the door can not be upholstered. The reconstruction of the canvas with a laminate is suitable for both iron and wooden doors. However, for all its advantages (speed of work, simplicity, low cost) this method has its drawbacks. Even a moisture-resistant laminate will not retain its appearance for long if the door goes outside and is exposed to rain. Laminate is easy to spoil, scratch and punch, especially if there is no combination lock in the entrance and teens often drop in there.
MDF panel It is distinguished by its strength, environmental friendliness (the bonding agent of the plate is a natural lingin), the ability to create any relief on the plate. The whole plate meets the main task of the front door - enhances its resistance to breaking. In addition, MDF easily tolerates fluctuations in temperature and humidity, which allows it to be used for outdoor decoration. The only negative is the inability to make a one-piece panel at home.
Veneer - These are thin strips of wood that are glued to the base (wood of cheaper conifers or metal). A feature of veneer is the ability to select noble material for imitation, for example, walnut, Karelian birch, mahogany, hornbeam, cherry and others. The disadvantage of this material is its high cost, difficult gluing work, and susceptibility to spoilage due to high humidity.
Self-adhesive film - A quick and cheap way to reconstruct metal doors. It is convenient to stick on a flat door without texture and carving. A high-quality film can last from the outside for several years.
Can I do it myself?
In order to make the reconstruction of the doors, it is not necessary to contact professionals, you can do it yourself. Each method can be implemented at home in the presence of a minimum amount of tool and desire, beautifully restore the coating of Chinese doors.
What you should definitely remember:
- preliminary preparation is always made. The old coating is removed, the varnish, paint, traces of rust and corrosion are removed. Before you pack the door into a new "wrapper", you need to treat the tree with antibacterial and antifungal compounds, and prime the metal with an anti-corrosion film,
- if it is planned to cover the door with laminated film or veneer, then the surface is pre-leveled with putty. These materials are very moody to irregularities - all the bulges and depressions are very clearly visible,
- it is worth remembering that the film is glued from the edge with the subsequent rolling of the roll. Air bubbles are expelled from the center of the glued area to the edges. The veneer is glued from the end so that there are no visible joints, and on the sheet itself, the first strip is attached in the center and the rest are aligned along it,
- if the metal door requires replacement of the front panel, then in parallel with it it is better to carry out thermal insulation of the structure with foam, which is placed inside between the stiffeners.
Ways
The easiest and most durable way - MDF paneling inside and out. Door lining panels are sold in standard sizes and in a wide variety of embossed patterns. For its self-adhesive sticker, only liquid nails and a jigsaw will be required for cutting holes for fittings. The door must be removed from the hinges, prepare the surface for the adhesive (degrease), glue the panel, press down with a load and leave to dry completely.
The method of finishing with a laminate is a little more complicated, but it is suitable for doors of a non-standard size. To upgrade you will need a laminate, liquid nails, slats, a hacksaw for sawing material, cargo and standard little things: a glue brush, a screwdriver for accessories, possibly a hammer or a mallet.
The algorithm of the work:
- Remove the door from the hinges, remove the hardware, place the canvas in a convenient place with good emphasis so that you can press the laminate to the surface,
- slats in the tone of the laminate (pre-painted or bought ready-made) are sawn exactly along the length and width of the door frame. Reiki is needed in order to create a frame inside which the laminate will be laid,
- on liquid nails, the slats are mounted around the perimeter of the door,
- a shield is assembled from the laminate in advance. Laying a laminate directly in the frame is impossible due to its design features. The boards should be tightly fitted to each other, sawn to the size of the door so as not to crumble at the time of laying in the frame,
- holes for door locks and other hardware are cut out before the shield is fixed to the door,
- on liquid nails we fasten the shield to the door leaf. In this case, the sheet itself is lubricated with the adhesive, and not the laminate,
- we press the shield against the door with a load for several hours. It’s best to distribute the load evenly,
- we cut the fittings and hang the door in place.
Finishing the door with dermantine is an option for the inside of the canvas, and even if there are no pets in the house. A huge plus is the aesthetic component and the practical one - noise and heat insulation. If exterior decoration is required, it is better to choose vinyl or amyl leather, they are more resistant to temperature changes. Eco-leather is also suitable, but it is more porous and not so resistant to pollution.
As an internal filler, you can choose foam rubber, batting and isolon. Foam rubber will give a beautiful texture, but its insulation characteristics are average. Batting is well insulated from noise and cold, but it is very toxic in case of fire and subsides over time. Isolon is the best option between aesthetic appearance and technical characteristics.
It is not difficult to finish the product with a laminating film - thermal stickers are cut exactly to the shape of the canvas and glued to liquid nails. Veneer restoration also does not require much effort - glue has already been applied to the strips, which is heated with an iron immediately on the canvas.
Beautiful examples
If you take the examples of restoration, those doors look best where not only one door leaf was updated, but also the slopes around the door. The slopes are finished not in the tone of the canvas, but in a darker color, which makes the door an element of design.
The restored door with laths trim from which overhead scallops of various configurations are made looks very original. Also for these purposes, you can use wooden carved corners, creating beautiful platbands from the side of the door facing the entrance. If the door is first required strength, it is best to use a sheet of thick smooth metal, glued with veneer or MDF panel.
Door restoration is not such a complicated technological process, but rather a routine procedure available to everyone. The main thing is to approach the matter creatively and with a certain degree of accuracy.
You can find out how to replace a simple door trim with an MDF trim by watching the video.
